Armattan Rooster 6s

By Power_FPV on Apr 22, 2019

2  221  0

Rooster 6s build! This thing is like a tank, only thing I really need to upgrade is get a better SMA extenstion, sometimes it'll pop out of the mount.
Have a Foxeer Falkor on the way. Excited to try it out.

It was fun to try and get everything in, but I think it went well.

Also have to take some more photos, some are pretty old :P


Part List


Armattan Rooster Frame Kit (133 builds)

Flight Controller

DYS F4 Pro Version 2 (7 builds)


4 x Spedix GS35 2-6S 32Bit DShot1200 35A ESC (25 builds)




DALPROP Cyclone T5047C Triblade Propeller for FPV Racing (6 Pairs) POPO COMPATIBLE (6 builds)

FPV Camera

Foxeer Falkor 2 1200TVL FPV Camera 4:3/16:9 PAL/NTSC G-WDR OSD (18 builds)

FPV Transmitter

iFlight Force VT5804 V2 5.8G 48CH 0/25/100/200/400/600mW Switchable FPV Transmitter Support OSD (12 builds)


TBS Triumph-STUB SMA (RHCP 2PCS) (142 builds)


TBS Crossfire Nano RX Special Edition (SE) (337 builds)


CNHL MiniStar 1250mAh 22.2V 6S 70C Lipo Battery XT60 Plug for RC Drone FPV Racing (21 builds)


FrSky ACCST Taranis Q X7 Transmitter 2.4G 16CH Mode 2 White Black International Version for RC Drone (218 builds)


Flysight Falcon FG01 Goggles with DVR (2 builds)

HD Camera

GoPro Hero7 Black Video Camera GPCHDHX-701 (84 builds)

HD Camera

GoPro Hero5 Session Waterproof 4K Video Camera (267 builds)


ND Filter Session Mounts (TBS ND Filters) (Choose your frame) (4 builds)

Misc Parts

New Vifly Finder 2 5V Super Loud Buzzer Tracker Over 100dB w/ Battery & LED Self-power for RC Drone (20 builds)

Radio Module

TBS Crossfire Transmitter

Battery Charger

ISDT Q6 Lite 200W 8A MINI Pocket Battery Balance Charger for 2S-6S Lipo Battery (25 builds)

Soldering Iron

48W Digital Soldering Station - Rhino Electricians Tools


22 Piece Long Bit Screwdriver Set with Case


Grenade Backpack


2 x FrSky M7 Hall Sensor Gimbal for Taranis Q X7 (6 builds)

Misc Supplies

Glass ND Filters - ND4 (2 builds)
Show stores (14)


Sign in to comment

Guides & Reviews

29 1,565  11
25 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 5,031  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more