My first 5" racer.
Tried to keep the build as clean as possible. The stack with integrated VTX and the pocket in the TPU canopy for receiver and LED definitely help with it.
Stubby antenna (with TPU adapter) and immortalT to keep the booty clean.
Finally, tried to go with a white/purple color scheme, but honestly mainly because I already had the motors from an older remix build (which has purple standoffs).
Weight: 306g (without battery)
Frame |
RAGING DRONER 5R FRAME (no canopy)
(17 builds)
Catalystmachineworks.com
|
$67.99 |
Flight Controller |
GEPRC SPAN F4 Tower F4 Flight Controller & 48CH 25/200/600mw VTX & 40A 4 IN 1 BLHeli_S ESC 2-5S
(6 builds)
Banggood.com
|
$102.99 |
Motors |
4 x FPVracing.ch
Fpvracing.ch
|
$36.00 |
Propellers |
Gemfan Flash Durable 5149-3 CHOOSE COLOR
(18 builds)
Pyrodrone.com
|
$3.29 |
FPV Camera |
Foxeer Predator Micro V3 1000TVL 1.8mm FPV Camera
(21 builds)
Getfpv.com
|
$36.99 |
Antenna |
Lumenier Micro AXII Shorty MMCX 5.8GHz Antenna (RHCP)
(9 builds)
Getfpv.com
|
$19.99 |
Receiver |
TBS Crossfire Nano Rx - FPV LONG RANGE DRONE RECEIVER
(1500 builds)
Team-blacksheep.com
|
$24.95 |
Misc Parts |
RunCam Mini FPV DVR
(12 builds)
Racedayquads.com
|
$17.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
hello can you please tell me how you were able to map the Crossfire RX through the GEPRC Span flight controller? IWhich UART did you use and what was the settings in Betaflight? Appreciate your help
unfortunately I dint have the quad anymore, but from the pictures I think I used UART1 (the black cables) and fir the settings you can set it up like in Oscar Liang Crossfire tutorial. happy flying!