PICKLE TOOTHPICK (38g)

By wklee.fpv on May 14, 2019

37 206 8

LEDroneClub Pickle mini fpv frame kit v2
HBS F405 F4 Flight Controller
Happymodel EX1102 9000KV motor
3DPOWER 10 PAIRS 65mm PROP
Caddx Turbo EOS2 camera
TBS Unify Pro32 vtx
TBS Crossfire Nano RX

Weight: ~38g

Frame and canopy is designed by Alex Arvinte

You could download his designs at https://www.thingiverse.com/ledroneclub/designs

Finally had time to test it:

Part List

Frame	3DPOWER x LEDroneClub Pickle mini fpv frame kit v2 for 1102/070x/080x motor Tiny whoop Frame Betafpv Toothpick Taco-rc.com	$14.99
Flight Controller	HBS F405 F4 Flight Controller AIO Betaflight OSD BEC & Built-in 5A BL_S DShot600 ESC 1-2S for RC Drone FPV Racing KababFPV Tooth (5 builds) Taco-rc.com	$29.99
Motors	4 x Happymodel EX1102 9000KV Mobula7 HD Original Brushless Motors for 2s-3s 75mm-85mm Whoops DIY FPV Drone Quadcopter (4 builds) Taco-rc.com	$27.96
Propellers	3DPOWER 10 PAIRS 65mm PROP v2 With 1.5mm Hole (10CW+10CCW) (2 builds) Taco-rc.com	$4.99
FPV Camera	Caddx Turbo EOS2 1200TVL 2.1mm 160 Degree 1/3 CMOS 4:3 Mini FPV Camera NTSC For RC Drone - NTSC (6 builds) Taco-rc.com	$14.99
FPV Transmitter	TBS Unify Pro32 Nano 5G8 (401 builds) Taco-rc.com	$29.95
Receiver	TBS Crossfire Nano RX (1506 builds) Taco-rc.com	$39.95
Misc Parts	TACO-RC Micro Race Wire 16mm(6 pcs.) (5 builds) Taco-rc.com	$2.49

Show stores (1)

Like Copy Part List Follow wklee.fpv

Discussion

seppli_fpv Jul 18, 2021

do you still use the 5a esc with those emax avan props ? doesn t it burn?

Rembem Mar 13, 2020

What type of flight times do you get?

Rice_Bowl May 24, 2019

hey what kind of filament did you use for the canopy?

wklee.fpv May 25, 2019

TPU

Rice_Bowl May 26, 2019

hmmm doesnt it get too jelly? is petg better? which between petg and tpu would you prefer?

sebsx Jun 14, 2019

98 or even 95 TPU isn't jelly, it's just flexible enough not to be brittle like PLA or even PETG

Rice_Bowl May 24, 2019

Also should i still put tpu spacers under the motors? does that have any effect at this size?

wklee.fpv May 25, 2019

I think that there is no need to add tpu spacers under that motors. for current setup, my toothpick get no vibration at all.

Rice_Bowl May 26, 2019

glad to hear! i didnt want to waste some tpu for something i wont use. Thanks!

Nikotttin May 17, 2019

could you please upload more pics of your mounting and of the vtx? I‘m building the same and don‘t know how to play with the various screws :)
thanks!

wklee.fpv May 18, 2019

I just put the vtx on the fc.

Nikotttin May 18, 2019

thanks very much!
In the pack, I also received some M2 white spacers. did you use these between the FC and the frame or did you simply use the long screw and some rubber gromets?

MidnightQuads May 15, 2019

How does the HBS fc work? I was looking at that one too

wklee.fpv May 18, 2019

It works fine. havent have any issue after 50 packs flying!!

Rice_Bowl May 17, 2019

whoaaa whats your flight times with that thing. Looks great dude!

wklee.fpv May 18, 2019

at least 3 mins for normal flying.

Nikotttin May 17, 2019

could you please upload more pics of your mounting and of the vtx? I‘m building the same and don‘t know how to play with the various screws :)
thanks!