My first ever build, it's pretty decent. Inspired by KababFPV's and The RCAddict's cheapest quad worth building.
Build video I used, make sure to use in conjunction with the FC schematics.
This is how I set up Betaflight.
My PIDs and filter settings
Updated part list if I were to build this today (6S): https://rotorbuilds.com/build/20942
Notes & What I'd do Differently:
- The batteries for the quad can be used for the goggles I chose, so I just rotate all batteries around.
- If you've got some extra cash to spend KababFPV now recommends the iFlight Xing-E 2306 motors for a few dollars more.
- Good props are: Gemfan 51433, Nazgul 5140, DAL Nepal N1.
- Getting a nylon standoff kit with shorter sizes is better. The one I purchased has too many useless long standoffs. I'd get this.
- Get the ISDT Q6 Pro and Lantian power supply bundle instead.
Additional Supplies (Total about $20)
Solder (60/40 0.8mm No Clean)
Threadlock (243, Blue)
Prop Tool (M5 / 8mm nut)
Pliers
Wire Cutter
Flights (Latest at the bottom)
HD flight around a construction site (5th and 6th ever flights)
Cruisin' Through Thailand (A DVR Compilation)
My Latest Flight
Photos
Part List
Show stores (1)Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Could you put a 3D file on the antenna mount?
Thanks in advance
Yo, it was this: https://www.banggood.com/URUAV-3D-Printed-TPU-Fixing-Mount-Seat-For-Realacc-UXII-FPV-Antenna-U_FL-and-MMCX-Plug-Compatible-p-1352541.html?rmmds=myorder&ID=229&cur_warehouse=CN