Dquad Obsession. Awesome frame with rollcage. True X for 5''.
***05/12/2018 RX switched to crossfire nano with immortal t
Frame |
Dquad Obsession
N-factory.de
|
See Site |
Flight Controller |
BetaflightF3 Flight Controller
(134 builds)
Fpvmodel.com
|
$29.66 |
ESCs |
4X Racerstar RS30A V2 30A Blheli_S ESC OPTO 2-4S Support Oneshot42 Multishot 16.5 Dshot600 for RC Drone
(89 builds)
Banggood.com
|
$53.57 |
Motors |
4 x Cobra Champion Series 2205 CP2205 2300KV 2500KV 3-6S Brushless Motor For 210 250 FPV Racing Frame
Banggood.com
|
$75.96 |
Propellers |
DALProp CYCLONE Series 5050C High End Propellers
Surveilzone.com
|
$2.79 |
FPV Camera |
Foxeer Sony CCD Arrow camera Built-in OSD Audio 5~40V
(2 builds)
Surveilzone.com
|
$14.99 |
FPV Transmitter |
TBS Unify Pro 5G8 HV Race (SMA)
(555 builds)
Team-blacksheep.com
|
$24.95 |
Receiver |
TBS CROSSFIRE NANO RX (SE) - FPV LONG RANGE DRONE RECEIVER
(412 builds)
Team-blacksheep.com
|
$29.95 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hi mate.. I have almost the same set up as u.. I'm just struggling with how to mount the elite bundle in the obsessions frame.. any advice would be greatly appreciated..
I have managed to fit two layers on the fc stack by replacing the original aluminium fc standoffs that come with the frame. I use a long screw together with two plastic screw nuts instead. That will save you 3mm. That is enough two fit a second layer underneath the aluminum cage.
I haven't even got to weather the cage will fit on our not yet lol..
I thought about using nylon screws but thought they might not be strong enough with them being part of the structural strength of the frame..
I'm not at home at the min but are the standoffs that come with it aluminium then as i thought the ones that came with my kit are plastic seeing as they are black..
Is there any chance u could post a pic of your build.. especially the mounting..it would greatly help me out.. thank u..
I am away on business until Friday. But I will post some pics on Saturday.
Ok cool.. thanks for the help so far mate..
Any chance of a pic of your mounting mate this thing is driving me mad lol.. think i may have bitten of more than i can chew for a first build lol
Hey Bud. Sorry. I am still en route. I should be back home home on Thursday if nothing comes up.