HoverBot.io

By solaireFPV on Feb 04, 2017

9 4 2

FINISHED! Awesome frame and awesome little flier! NOT RECOMMENDED FOR BUILDERS WORRIED ABOUT THEIR SOLDERING SKILLS! LOTS OF SMALL PARTS!

OTHERWISE, a hoot to fly. Cannot wait to get more batteries and get this thing flying hard.

Photos

Part List

Frame	Hoverbot Nano Frame (13 builds) Hoverbot.io	$14.99
Flight Controller	Piko BLX F3 Flight Controller (2 builds) Readytoflyquads.com	$23.00
ESCs	4 PCS Racerstar RS6A V2 BB2 Blheli_S 6A 1-2S Brushless ESC 18*11mm Support Oneshot42 16.5 Dshot600 (11 builds) Banggood.com	$28.99
Motors	4 x Racerstar Racing Edition 1103 BR1103 8000KV 1-2S Brushless Motor Dark Blue For 50 80 100 Multirotor (3 builds) Banggood.com	$34.76
Propellers	8 Pair DYS 2030 1.5mm Hole 2 Inch 3 Blade Propeller Triblade Bullnose Prop For 1102 1104 1105 Motor (18 builds) Banggood.com	$3.89
FPV Camera	VM275T 3.3g Nano 5.8GHz 48CH AIO FPV System (3 builds) Hoverbot.io	$29.99
Receiver	FrSky Ultralight XM Receiver Up To 16CH for RC Drone FPV Racing (71 builds) Banggood.com	$11.99
Batteries	Turnigy nano-tech 450mAh 2S 65C Lipo (E-flite Compatible - Blade 130X EFLB3002S35) (13 builds) Hobbyking.com	$9.06
Radio	FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo w/ case (Mode 2) (52 builds) Getfpv.com	$244.99
HD Camera	GoPro Hero5 Session, 1080p (302 builds) Amazon.com	$230.41
Misc Parts	Nylon Camera Mount for VM275T (4 builds) Hoverbot.io	$4.99

Show stores (6)

Like Copy Part List Follow solaireFPV

Discussion

morsha Jul 13, 2017

Do the pops spin off? Have the same motors and props and props fly away!.

adroc Feb 06, 2017

Whats props are those and how load is it with them?

solaireFPV Feb 06, 2017

Updated the build for the correct props. The props are not quiet, but in comparison to any five inch build they are quiet. I am looking for some non-bull nose props currently.

adroc Feb 06, 2017

How well do those fit on the racerstar 1103's? I have heard that these cut down to 56mm are the way to go.
https://getpropsman.com/products/hqprop-3-inch-quad-blade-propeller-3030-3x3x4?variant=27536869377
Any experience with them?

solaireFPV Feb 06, 2017

They fit very well! I have heard from other people that sometimes they are a little loose, but I had no trouble with the friction fit. Very easy to install and remove.