Chameleon Ti6

By Waffles on Oct 15, 2019

5  373  0

Armattan Chameleon Ti 6" with Xing 2750kv and F55II.. loading...

Alright, so the DJI air unit does not fit into the chameleon ti 6" when mounting the flight controller to the frame. I had to 3D print an adapter that shifted the board over 6.5 mm. and the back part acts as a small platform for the airunit/cables/rx. (see last image).

Edit: Now using Ethix props.


Part List


Chameleon Ti LR 7 inch (9 builds)

Flight Controller

HolyBro Kakute F7 HDV Flight Controller (10 builds)


T-Motor F55A Pro II 32Bit 55A 3-6S 30x30 4in1 ESC w/ BEC (21 builds)


4 x IFlight Xing 2306 1700KV Camo - Get Yours Today! - RMRC (2 builds)

FPV Camera

DJI Digital HD FPV Camera (81 builds)

FPV Transmitter

DJI Digital HD FPV Air Unit Module (73 builds)
Show stores (4)


Sign in to comment

Guides & Reviews

39 4,044  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,835  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more