Quadropus Toothpick (Sanchez)

By Quadropus on Jun 12, 2020

9  379  2

This is my Toothpick build! The frame is designed by dave_c_fpv. I cut this frame myself on my CNC machine.
The AUW is 87g with LiPo included. I get flight times around 4-5min.
Video of me cutting the carbon fiber frame on my MPCNC:


Part List


The Sanchez [3 Inch Toothpick Style] by Dave_C_FPV (11 builds)
See Site

Flight Controller

MAMBA F411AIO F4 Toothpick Dshot600 4S


4 x iFlight Xing Nano X1204 6500KV NextGen Motor


HQProp Toothpick 65mm Prop Grey 1.5mm 5CW/5CCW

FPV Camera

Runcam Nano 2 1.8mm

FPV Transmitter

TBS Unify Pro Nano 5,8GHz 25mW (2 builds)


FrSky R-XSR SBUS 2.4GHz Micro ReceiverDefault Title (875 builds)


Tattu 2S 450mAh 75C Lipo Long XT30 Whoops (3 builds)
Show stores (4)


Sign in to comment

Somebody   Jun 14, 2020  

Looks gorgeous. Can it handle 3 inch props?

Quadropus   Jun 15, 2020 

Thanks! The frame, the AIO board and the motors should be able to handle it. I have not tried it yet. Maybe a 3s battery could be useful in this case.

Guides & Reviews

59 4,724  48
Aug 26, 2020

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,687  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more