Frameshop Hive

By Frameshop.ch on Jan 18, 2020

8  174  0

Hey There

We are running a FPV-Frame Shop mainly for Swiss Pilots, you can find it here: http://frameshop.ch/

As a kick-off we designed a 5 Inch Racing Frame.

Alt Tag

The specialties on this Frame are interlocking Arms, the Arms are getting strengthened from a Plate wich gets partially milled down from 4mm to 2mm.
Through this System, the whole Frame should be stiffer and the Arms are pretty fast to change.

In the Front of the Bottomplate are only two Slots, so you can only loosen the Screw a bit to get to the Electronics of your Quad.
Originally this Idea came from sliding in a Canopy in the Front and tighten it with the Standoff in the Back so maintenance on this Quad is fast.
This Canopy is old but it shows our Idea.

Alt Tag

The Plan is, after everything is tested to sell it in our Shop, so follow us on Instagram to receive the Notification when they are available ;)
And here is another Render of the Frame itself.

Alt Tag

Photos

Discussion

Sign in to comment

Guides & Reviews

58 4,640  47
30 days ago

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,683  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more