Rebel Yeti Long Range 8inch (DJI HD)

By Unknown FPV on Mar 06, 2020

34  2,047  8

Check out a 360º VIEW of the build here:

This frame is not made for the DJI HD kit, so I attached it to the bottom end and printed a 3d part and swapped the stock antennas out for 2 VAS ions (see pictures other than the cover photo, that was before improvement). I stack 2 1300 6s batteries on top of eachother in parallel.

This setup works amazingly well for me! Apart from it being a beautiful quad it also performs very very well (after tuning). The graupner e-prop 8inch propellers are great (do need to be balanced) but very hard to get your hands on. Oh and those XING motors, the sound is well... lets say; very orgasmic.

PS: Chase from Rebel did tell me they were working on a DJI conversion kit for the yeti frame, but this seems to be a typical "2 weeks" maybe never" project ;)

PS 2: If you do decide to get this frame, and like me you are not from the States be prepared to pay tax on arrival at customs, this happened to me in Spain. Sucked big chocolate balls!

Check out a 360º VIEW of the build here:

Maiden Flight: (stock BF)

Rocking it...


Part List


Yeti 8"-10" Long Range Frame

Flight Controller

XRotor Flight Controller F4 G3 w/OSD for FPV Racing - HOBBYWING North America (2 builds)


XRotor Micro 45A 4in1 ESC BLHeli32 Dshot1200 6S for FPV Pilots - HOBBYWING North America (2 builds)


4 x iFlight XING X2814 2814 1100KV 6S Brushless Motor for DC10 Long Range X-Class Frame Kit RC Multi-Rotor


4 x Graupner E-Prop 8x5

FPV Camera

DJI Digital HD FPV Camera (88 builds)

FPV Transmitter

DJI Digital HD FPV Air Unit Module (79 builds)


2 x Video Aerial Systems VAS ION V2 5.8GHz SMA Antenna - RHCP or LHCP (11 builds)


TBS Crossfire Diversity Nano Rx - FPV LONG RANGE DRONE RECEIVER (48 builds)


2 x CNHL BLACK SERIES 1300MAH 22.2V 6S 100C LIPO BATTERY (23 builds)


DX9 Black Transmitter Only MD2


DJI Digital HD FPV Goggles (100 builds)

HD Camera

GoPro HERO7 Black Action Camera (86 builds)

Misc Parts

(LB #31) 4pcs Panasonic FC 1000uF 50v 105C Radial Electrolytic Capacitor Low ESR (5 builds)

Misc Parts

Matek M8Q-5883 GPS Module w/ Compass (30 builds)

Radio Module

TBS Crossfire TX (15 builds)

Battery Charger

HOTA D6 PRO Charger AC200W DC650W 15A (6 builds)

Soldering Iron

MINI TS100 Digital OLED Programmable Interface DC5525 Soldering Iron Station Built-in STM32 Chip (179 builds)


Ethix Prop Tool (2 builds)


VAS Shapeshifter Selectable Gain Antenna

Misc Supplies

Tru-Spin Prop Balancer
Show stores (12)


Sign in to comment

KuriOSS   Apr 14, 2020  

Finally, i got this frame. So i just wanna know that max. battery size. i will use 6s 2200mAh. for more runtime, i'd like to use 3300mAh. Can it be used with 8"

Unknown FPV   Apr 14, 2020 

you can use any lipo you please, 5000 even

KuriOSS   Apr 14, 2020 

Oh, that's sound great! i will try thanks, mate!

KuriOSS   Mar 09, 2020  

That's sick! Could you show how you mount the DJI air unit ?

Unknown FPV   Mar 09, 2020 

Thanks yeah sure, you can click the link in y description for a 360 view.
And here a pic of the back!

KuriOSS   Mar 09, 2020 

Thanks for showing and review!

Unknown FPV   Mar 09, 2020 

No problem, you are welcome! Its an awesome frame. Any questions, hit me up on FB: Unknown FPV

StickyRice   Mar 08, 2020  

WOWW thats a gorgeous top plate!!! thats one good looking kwad!! greatjob!!

Guides & Reviews

60 5,309  52
Aug 26, 2020

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,800  20
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more