Put this together with parts I had laying around.. tmotor f60s with antique rotorgeek 20 amp esc.. oneshot. kakute F7 aio board, runcam, tbs vtx, frsky x-rsr. 1500mah 4s ovanic. Frame is a Flynoceros Cerberus v2, with 3d printed housing facing the cam backwards.
edit: 05242020, switched esc to 32bit, the old rotorgeek ones were making some funky noise..
Photos
Part List
Flight Controller |
Holybro Kakute F7 AIO V1.5 Flight Controller
(21 builds)
Getfpv.com
|
$49.99 |
Motors |
4 x T-motor F60 Pro II 1750KV 3-6S Brushless Motor for RC Multirotor FPV Racing Drone
(6 builds)
Banggood.com
|
$99.60 |
Propellers |
HQ Prop ETHIX S5 5x4x3 Tri-Blade 5" Prop 4 Pack - Light Grey
(80 builds)
Racedayquads.com
|
$3.49 |
FPV Camera |
RunCam Micro Swift 2 600TVL 2.1/2.3mm IR Blocked 1/3 CCD FPV Camera PAL/NTSC 5.6g
(282 builds)
Taco-rc.com
|
$32.99 |
FPV Transmitter |
TBS Unify Pro 5G8 HV (SMA)
(596 builds)
Getfpv.com
|
See Site |
Antenna |
Foxeer Lollipop V3 5.8GHz Stubby SMA Antenna 2 Pack - Choose Your Polarization and ColorRed / RHCP
(60 builds)
Racedayquads.com
|
$19.90 |
Receiver |
FrSky R-XSR 2.4GHz Micro ReceiverDefault Title
(937 builds)
Racedayquads.com
|
$21.99 |
frame or props in view?
The frame and props/prop nuts are visible below about 40 degree cam tilt. Lowest possible cam angle is around 28-30 degrees, then the frame and props can really be seen.. I uploaded a few pictures with the cam view at different angles.
Awesome. Great build. Thanks for the info.