GEPRC KHX7 'Elegant' HD conversion

By drewzh on Apr 05, 2020

11  398  0

I designed and printed a few parts to upgrade a GEPRC KHX7 to support the DJI HD system. These 3d prints can also be used with other KHX frames.

Photos

Part List

Frame

Geprc GEP-KHX7 Elegant 7 Inch 300mm Wheelbase 4mm Arm 3K Carbon Fiber FPV Racing Frame Kit
Banggood.com
$74.08

Flight Controller

Holybro Kakute F7 HDV 30x30 Flight Controller for DJI (11 builds)
Racedayquads.com
$37.99

ESCs

Holybro Tekko32 F3 Metal 4-in-1 ESC (5 builds)
Pyrodrone.com
$73.99

Motors

4 x T-motor F40 Pro III 1600KV 4-6S CW Thread Brushless Motor for RC Drone FPV Racing (2 builds)
Banggood.com
$110.84

Propellers

2 Pairs DALPROP CYCLONE T7056C 7inch Crystal 3-blade Propeller for RC FPV Racing Drone (11 builds)
Banggood.com
$4.16

FPV Camera

DJI FPV Air Unit Digital 5.8Ghz 1080p/60fps 28ms/4km HD Recording FPV Transmitter Camera Combo for FPV Racing Drone RC Airplane (85 builds)
Banggood.com
$180.79

Receiver

TBS Crossfire Nano RX (SE) - FPV Long Range Drone Receiver (310 builds)
Team-blacksheep.com
$29.95

Batteries

CNHL MiniStar 1250mAh 22.2V 6S 70C Lipo Battery XT60 Plug for RC Drone FPV Racing (19 builds)
Banggood.com
$32.54

3D Printed

DJI Camera Adaptor (Snap-fit) by drewzh
Thingiverse.com
See Site

3D Printed

GEPRC KHX (KHX5, KHX6, KHX7) DJI Air Unit and antenna mount by drewzh
Thingiverse.com
See Site

Misc Parts

Eachine Wizard X220HV FPV Racing RC Drone Spare Part SpeedyBee bluetooth Module (4 builds)
Banggood.com
$8.17

Misc Parts

Matek Systems M8Q-5883 SAM-M8Q GPS & QMC5883L Compass Module for RC Drone FPV Racing (7 builds)
Banggood.com
$37.12

Misc Parts

Panasonic 35V 1000uF LOW ESR Capacitor (10 builds)
Getfpv.com
$1.99

Misc Parts

XT60 Pigtail 14AWG 4" - Choose Your ColorBlack (14 builds)
Racedayquads.com
$1.49
Show stores (6)

Discussion

Sign in to comment

Guides & Reviews

27 2,069  29
23 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
25 6,826  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more