Apus 2" Nano Toothpick

By rodrigo_sclosa on Apr 13, 2020

5  71  0

This is my 2" Nano Toothpick project that I drew from scratch. All the parts are free to download on the links bellow.

It's running Betaflight 4.1.1 with JESC 48khz on ESC's. You can download my tunning on: https://drive.google.com/open?id=17fntAWFriII1oDIEg4zRxar5csGRnDpr

It flies with 2S or 3S LiHV Lipos. The Dump included a tunning for each battery.

You can see it flying at:

https://www.instagram.com/tv/B66K9xxnt7m/

https://www.instagram.com/tv/B68NuxSHyqh/

If you liked this, please consider to buy me a coffee at https://www.buymeacoffee.com/rodrigosclosa

Photos

Part List

Frame

Apus 2" Nano Toothpick Frame
Cults3d.com
See Site

Flight Controller

iFlight SucceX Micro F4 stack V2.1 15A (7 builds)
Rotorama.com
$62.46

Motors

4 x US $43.67 20% OFF|2019 New T Motor F10 1104 7500KV 2 3S Brushless Motor for 90 110mm RC Drone FPV Racing CineWhoop BetaFPV|Parts
Aliexpress.com
See Site

Propellers

EMAX Avan Blur 2x1.9x3 Tri-Blade 2" Prop 4 Pack - RedDefault Title (5 builds)
Racedayquads.com
$1.49

FPV Camera

RunCam Nano2 (103 builds)
Pyrodrone.com
$19.99

FPV Transmitter

iFlight SucceX Micro V2 (M3 Holes) 16x16 25-200mW VTX for CineBee 75HD (3 builds)
Racedayquads.com
$13.00

Antenna

2pcs HGLRC 6.5cm 65mm 5.8G 2dBi U.FL IPEX IPX Omni Directional Linear Brass FPV Antenna RG178 For RC Drone (9 builds)
Banggood.com
$2.61

Receiver

Flysky FS-A8S FS A8S 2.4G PPM付き  8CHミニレシーバー i-BUS SBUS出力 (12 builds)
Banggood.com
$10.58

Batteries

GNB 450mAh 3S 80C LiHV Battery (XT30) (11 builds)
Hobbyrc.co.uk
$12.89

Radio

Jumper T16 Pro V2 Hall Gimbal Multiprotokoll RC-Sender mit OpenTX & TBS Crossfire Support (Mode 2), FPV1.DE (2 builds)
Fpv1.de
$264.56

Goggles

SKYZONE SKY02X 5.8Ghz 48CH Diversity FPV Goggles With Head Tracker Front Camera Fan 2D/3D HDMI For RC Drone (9 builds)
Banggood.com
$285.55

3D Printed

Apus 2" Nano Toothpick - 3D Printed Parts
Cults3d.com
See Site

Radio Module

FrSky R9M Module (67 builds)
Pyrodrone.com
$49.99

Backpack

Realacc Backpack Case with Waterproof Transmitter Beam port Bag Tool Board for RC Drone FPV Racing (11 builds)
Banggood.com
$61.79
Show stores (8)

Discussion

Sign in to comment

Guides & Reviews

28 1,450  11
22 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 4,945  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more