Floss 3 Lite

By WoLf FPV on Apr 14, 2020

12  217  2

This is quad four out of five, the floss 3 lite.
With this build, it was to experiment 20x20 stacks and light weight builds
The build came out very nice and flys amazing. Just needed to design some nano cam mounts to really make this build pop and perform better than it is currently.
Nice and Clean, details down to the solder and wires

Photos

Part List

Frame

Hyperlite Floss 3.0 LITE Race Frame "5 INCH" (2 builds)
Pyrodrone.com
$44.99

Flight Controller

AIKON 2020 Stack combo (6 builds)
Pyrodrone.com
$79.00

Motors

4 x XILO 2207 2550KV Motor (10 builds)
Getfpv.com
$75.96

Propellers

HQ HEADSUP FPV R38 Racing Propeller (2CCW+2CW) (12 builds)
Pyrodrone.com
$3.39

FPV Camera

RunCam Nano2 (103 builds)
Pyrodrone.com
$19.99

FPV Transmitter

AKK Nano 3 Micro 25-200mW VTX w/ Smart Audio - U.FL (13 builds)
Racedayquads.com
$14.99

Antenna

Lumenier Micro AXII Shorty U.FL 5.8GHz Antenna (RHCP) (29 builds)
Pyrodrone.com
$19.99

Receiver

FrSky XM+ SBUS 2.4GHz Mini Receiver (26 builds)
Pyrodrone.com
$12.99

Batteries

CNHL Black Series 1500mAh 14.8V 4S 100C Lipo Battery (4 builds)
Chinahobbyline.com
$25.49
Show stores (4)

Discussion

Sign in to comment

Flip_FPV   Apr 16, 2020  
1

Sweet looking build, very clean. Love the color coordination. Soldering looks top-notch too!

WoLf FPV   Apr 16, 2020 

Thank you very much! Be sure to follow for more upcoming builds :)

Guides & Reviews

28 1,450  11
22 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 4,943  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more