This is my very first 3" Toothpick project that I drew from scratch. All the parts are free to download on the links bellow.

It's running Betaflight 4.1.1 with JESC 48khz on ESC's. You can download my tunning on: https://drive.google.com/open?id=1uDWlsGjhEdx5Cw2UNM-8FuXp8NevMntR

It flies with 2S or 3S LiHV Lipos. The Dump included a tunning for each battery.

If you liked this, please consider to buy me a coffee at https://www.buymeacoffee.com/rodrigosclosa

Photos

Part List

Frame	3" Toothpick Frame Cults3d.com	See Site
Flight Controller	iFlight SucceX Micro F4 stack V2.1 15A (7 builds) Rotorama.com	$62.46
Motors	4 x R$49.7 \|Happymodel ex1103 1103 6000kv 8000kv 12000kv 2 4 s motor sem escova para veleiro x palito rc zangão\|Peças e Acessório Pt.aliexpress.com	See Site
Propellers	HQProp T3X2 3Inch Propeller 2-Blade for 1104 1105 Brushless Motor FPV Racing Quadcopter Mini Drone Toothpick Frame (12 builds) Banggood.com	$2.40
FPV Camera	Caddx Turbo Eos2 Nano 1200TVL CMOS 16:9 NTCS FPV Camera (2.1mm) (37 builds) Racedayquads.com	$14.99
Antenna	2pcs HGLRC 6.5cm 65mm 5.8G 2dBi U.FL IPEX IPX Omni Directional Linear Brass FPV Antenna RG178 For RC Drone (9 builds) Banggood.com	$2.61
Receiver	Flysky　FS-A8S FS A8S 2.4G PPM付き　　8CHミニレシーバー　i-BUS SBUS出力 (10 builds) Banggood.com	$8.99
Batteries	GNB 450mAh 3S 80C LiHV Battery (XT30) (11 builds) Hobbyrc.co.uk	$9.85
3D Printed	Doom Canopy for Toothpick Drones (3inch or above) Cults3d.com	See Site
3D Printed	Monster Canopy for Whoop Drones (3, 4 or 5 inch) Cults3d.com	See Site
3D Printed	Ball Toothpick Canopy (Nano and Micro Cameras) - For 3" Drones and above Cults3d.com	See Site
3D Printed	Alien Toothpick Canopy - For 3" Drones and above (2 builds) Cults3d.com	See Site