Twiggy Smalls

By Drones_Brigade on May 03, 2020

9  342  3

My first twiglet build build. I'm amazed with the BetaFPV AIO 20a v3 board. This is an easy build. (edit: At first I thought this was a twiglet mini frame so I built it around a 2" high kv setup. After writing this out I found out that I ordered a twiglet rather than a twiglet mini. I put 2.5" props with 2s and it flies great. )

Naked weight : 62.4 (without Lipo)
AUW weight : 94,2 (with 550 mah 2s lipo)



Sign in to comment

orient344   May 24, 2020  

is this a full parts list ? what abot an esc

Drones_Brigade   May 24, 2020 

the esc is included in the AIO flight controller

KryptoSteel24   May 16, 2020  

too much TPU weight is so crucial at this size

Guides & Reviews

39 4,137  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
28 7,901  38
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more