Apus 5" Toothpick
By rodrigo_sclosa on May 05, 2020
This is my 5" Apus Toothpick Frame designed from scratch.
It was designed for AIO Whoop Boards, like newer ones with 20A or 30A constant current. I've made a Water Transfer painting on my frame to get this visual.
For AIO Board, I prefer a 30A one. Motors could be 1606 or 2207 because this is a ultra low weight setup (about 350g with 4s 850Mah Battery).
Check the links below to Download this design and all the 3D Printed Parts.
If you liked this, please consider to buy me a coffee at https://www.buymeacoffee.com/rodrigosclosa
Photos
Sweet build Rodrigo, cool pod!! I am having the worst time getting this FC wired to the Diamond VTX...any chance you could share how you wired these up? Starting to think something is broken. Recording works, but I get a black screen over the air. Thought it might be needing a common ground, but this setup is not conducive to that.