Krunked fettec'd apex 2

By Krunked on May 06, 2020

8  1,827  10

i wanted another one.

this thing flies incredibly.. check out the maiden flight below on 100% bone stock settings (cept my rates).. eat your heart out betaflight!!!

im sponsored by amax so take it for what this is worth -- these gotta be some of the best motors ive ever flown...

Need your quad tuned? Sick of tinkering with settings and just want to concentrate on flying?! I got you!

check me out at krunkedquads.com and drop in a ticket with me and lets get you in the air and show you what a quad SHOULD fly like!

krunkedquads.com

Photos

Part List

Frame

Apex 5" Base Frame Kit (10 builds)
Drone-fpv-racer.com
See Site

Flight Controller

FETTEC KISS F7 FC V1.2 20x20mm-30x30mm (33 builds)
Pyrodrone.com
$71.99

ESCs

FETtec 4in1 ESC 45A (25 builds)
Fettec.net
$69.90

Motors

4 x AMAX WM 2306 1950Kv Motor (2 builds)
Racedayquads.com
$71.16

Propellers

Gemfan 51433 Tri-Blade 5" Props (2CW + 2 CCW) (12 builds)
Fpvcycle.com
$0.99

FPV Camera

Foxeer Toothless 2 1200TVL Angle Switchable Mini/Full Size Starlight FPV Camera 1/2" Sensor Super HDR - Black (4 builds)
Heli-nation.com
$35.90

FPV Transmitter

TBS Unify Pro 5G8 V3 (SMA) (197 builds)
Getfpv.com
See Site

Antenna

RUSHFPV Cherry 5.8GHz SMA Antenna 2 Pack -RED - (RHCP or LHCP) (19 builds)
Pyrodrone.com
$12.99

Receiver

TBS Crossfire Nano Rx (SE) w/ Immortal T V2 Antenna (29 builds)
Getfpv.com
See Site

Batteries

Talon NFG Series 1150mAh 105C 22.2V 6S Lipo Battery with XT60 Plug (4 builds)
Heli-nation.com
$29.99

Radio

FrSky Taranis QX7 ACCESS 2.4GHz RC Transmitter - Choose Your Color (263 builds)
Racedayquads.com
$129.99

Goggles

Fat Shark Dominator HD3 Core FPV Goggles (87 builds)
Getfpv.com
$399.99

HD Camera

GoPro Hero5 Session Waterproof 4K Video Camera (303 builds)
Phaserfpv.com.au
$204.09

Misc Parts

ImpulseRC Apex Race Wire 4 Pack - Choose Your Color
Racedayquads.com
$5.99

Misc Parts

ImpulseRC APEX Ummagrip LiPo Pad
Racedayquads.com
$5.49

Misc Parts

ImpulseRC APEX Wire Harness Kit - KISS (2 builds)
Racedayquads.com
$4.49

Misc Parts

ImpulseRC Apex OSD Board (4 builds)
Racedayquads.com
$38.49

Misc Parts

ImpulseRC Apex Regulator Board (3 builds)
Racedayquads.com
$18.49

Video Receiver

FPV Video Receiver Antennas for - RaceDayQuads
Racedayquads.com
$74.99

Video Receiver

VAS SkyHammer 5.8GHz SMA Receiver Antenna - RHCP (2 builds)
Racedayquads.com
$29.99

Video Receiver

ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module (178 builds)
Getfpv.com
$159.99

Radio Module

TBS Crossfire Micro TX V2 (154 builds)
Team-blacksheep.com
$69.95

Battery Charger

HOTA D6 Pro 325W 15A 1-6S Dual Channel AC/DC Smart Charger w/ Wireless Cellphone Charging - Choose Your Color (56 builds)
Racedayquads.com
$124.99

Soldering Iron

TS100 Portable Programmable Smart Soldering Iron (265 builds)
Racedayquads.com
$58.99

Tools

Bundle: Cross Lock Fiber Grip Soldering Tweezers Set - 6.5" Solder Tweezers (Approx. 45-Degree Angle), 6" Solder Tweez (3 builds)
Amazon.com
$7.59

Tools

Rotor Riot Kwad Toolset (2 builds)
Rotorriot.com
$14.99

Backpack

Lowepro Quad Guard BP X2 Drone Backpack, Black/Grey (14 builds)
Amazon.com
See Site

Accessories

KISS Keychain Configurator V1.2
Pyrodrone.com
$34.99

Accessories

STRIX 6s Parallel Charging Board 2.0 JB Signature Line
Readymaderc.com
$24.99

Misc Supplies

MCN-UV80 Rosin-Base Soldering Flux Paste
Racedayquads.com
$5.99

Misc Supplies

Kester 24-6337-8800 50 Activated Rosin Cored Wire Solder Roll, 245 No-Clean, 63/37 Alloy, 0.031" Diameter (14 builds)
Amazon.com
$18.95
Show stores (12)

Discussion

Sign in to comment

bahacangun   Oct 14, 2022  

hi friends have you instagram ?

vlad_star   Sep 03, 2020  

Hello,
no standoffs visible with Foxeer Toothless 2?
thx

johnwhip   May 26, 2020  

Hey man, could you please tell me what ports did you use on the FC to connect Apex Regulator and Apex OSD. I would really appreciate if you explain it. You can explain it with replying or adding more pictures to make it clear.Thanks in advance

Show 2 more comments
johnwhip   May 27, 2020 

On the picture, connection is not complete. Regulator connections are not clear :(.

Krunked   May 27, 2020 
1

it is totally complete... im not sure what yer thinkin. but its just as plug between the regulator, to the apex osd, then from the apex osd to the FC.. its clearly visible

johnwhip   May 27, 2020 

Thanks. Now it makes sense :).Thanks a lot.

sal.mars44K.C.   May 07, 2020  

hey nice build man, i noticed you have your cap going into ur vtx input, hows the image going for you? i just finished a build an i put a cap at the battery connecter an a cap at the xt60 bat. pack connecter an it cleàred everthing up in my vid.

Krunked   May 07, 2020 

there is no cap going into thr vtx bruh.im.not auper suree what unaee seeing...bur i have a fettec spike absorber mounted ontop of the fc which has a cap attached to it thrn i run that to one of thr 4 cap pads prvided on th fettec esc...
let
me actually no vtx pictured here ;)

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more