Source1
By TW1NSCR3W FPV on Jun 03, 2020
This is my first top mount build, and my first with all new parts. I wanted the SabotageRC Dingo but liked how the arms on the Source1 were better secured.
The assembly went smooth, and solder joints were easy as could be. I chose the Mamba stack because it is well laid out. The standoffs are 25mm vs the factory 30mm. Motors are 2306 because i wanted lower end torque. The VTX suited my needs for an amazing price. With the FC having OSD I didnt need a camera with in-flight osd so i chose the Razer as it has a high tvl.
The reason I changed the esc is because on the maiden flight I did a power loop, wasn't use to the weight (vs my lite racers), couldn't pull out, and hit then ground. The impact yanked the power leads and pulled the solder pads clean off the esc. As of the June 3rd 2020 the re-maiden flight is scheduled for Saturday June 6th.
Photos
Part List
Show stores (5)Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for TW1NSCR3W FPV