Lumenier QAV-R2

By chrisvanish on Jun 15, 2020

6  169  3

My first modern Betaflight 5 inch. The last quad I owned before this was a ZMR250 on CC3D. This thing is an absolute ripper.

Photos

Part List

Frame

Lumenier QAV-R 2 Freestyle Quadcopter Frame (16 builds)
Getfpv.com
$74.99

Flight Controller

Lumenier LUX F7 Ultimate Flight Controller (Dual Gyros) (24 builds)
Getfpv.com
$44.99

ESCs

Lumenier BLHeli_32 32bit 50A 4-in-1 ESC 2-6s w/ BEC 2A/5v, DSHOT / Proshot (7 builds)
Getfpv.com
$58.99

Motors

4 x EMAX ECO Series 2306 - 2400Kv Brushless Motor (6 builds)
Pyrodrone.com
$47.96

Propellers

Gemfan WinDancer 5043 Tri-Blade 5" Prop 4 Pack - Choose Your Color (9 builds)
Racedayquads.com
$2.99

FPV Camera

Caddx Ratel Starlight 1200TVL HDR Low-Light Micro FPV Camera (89 builds)
Getfpv.com
$29.99

FPV Transmitter

Lumenier TX5GS 25-200-500mW 5.8GHz FPV Transmitter w/ BFCMS Control (MMCX) (28 builds)
Getfpv.com
$29.99

Antenna

Foxeer Pagoda Pro 5.8GHz Long SMA Antenna - RHCP - Choose Your Color (32 builds)
Racedayquads.com
$9.99

Receiver

TBS Crossfire Nano Rx (708 builds)
Getfpv.com
$29.95

Batteries

RDQ Series 14.8V 4S 1300mAh 100C LiPo Battery - XT60 (83 builds)
Racedayquads.com
$20.49

Radio

FrSky Taranis QX7 ACCESS 2.4GHz RC Transmitter - Black or White (218 builds)
Racedayquads.com
$129.99

Goggles

SKYZONE SKY02X 5.8Ghz 48CH Diversity FPV Goggles With Head Tracker Front Camera Fan 2D/3D HDMI For RC Drone (9 builds)
Banggood.com
$285.55

3D Printed

QAV R2 SMA + Crossfire Immortal T Mount by chrisvanish
Thingiverse.com
See Site

3D Printed

QAV-R2 GoPro Hero (5,6,7) Mount by chrisvanish
Thingiverse.com
See Site

Misc Parts

TBS Crossfire Immortal T Antenna V2 (6 builds)
Getfpv.com
$5.95

Misc Parts

Rush FPV Ultra-small External Automatic Gain Control VTX MicrophoneDefault Title
Racedayquads.com
$3.99

Radio Module

TBS Crossfire Micro TX
Getfpv.com
$69.99
Show stores (5)

Discussion

Sign in to comment

dafunk   Jun 23, 2020  

nice cover photo... and nice car
definitely from the late 80s' but can't tell which model ?

chrisvanish   Jun 23, 2020 

Thank you! It's a Toyota Corolla AE86 :)

Killawatts   Jul 01, 2020 
1

Dang!! The initial d fan in me had to comment! such a sweet ride.

Guides & Reviews

29 1,571  11
26 days ago

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more
44 5,035  47
May 05, 2020

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more