Here's another build using one of the NewBeeDrone DSM Honey Pots. On this one I used an extra set of grommets as spacers and some longer screws so I could use a Goober canopy that I had in my parts bins. These Honey Pots are a spectacular bargain. For only $20 plus shipping you get everything needed to build a complete FPV Whoop. The parts list below is everything you receive in the Honey Pot except for batteries, and the Goober canopy. The FC, vTX, and camera are included as an assembled stack in the Honey Pot though. If you follow the hardware link it will take you directly to the Honey Pots on the NewBeeDrone site.