HYPERLOW RS+ EX 6" DJI

By richrd on Aug 17, 2020

10  312  4

All new prints on thingiverse: https://www.thingiverse.com/hyperlow/designs

Photos

Part List

Frame

HYPERLOW RS+ EX (4 builds)
Hyperlowframes.com
$80.00

Flight Controller

NewBeeDrone Infinity305 Stack (ESC+FC) (5 builds)
Newbeedrone.com
$99.99

Motors

4 x RCINPOWER SmooX 2306 Plus Motor 2280KV Gun Metal (2 builds)
Pyrodrone.com
$91.96

FPV Camera

DJI Digital HD FPV Air Unit (143 builds)
Getfpv.com
$179.00

Antenna

Rush FPV Cherry 5.8GHz SMA Antenna 2 Pack -RED - (RHCP or LHCP) (10 builds)
Pyrodrone.com
$20.99

3D Printed

Thingiverse - Digital Designs for Physical Objects
Thingiverse.com
See Site

Hardware

Pyro Race LEDs 35mm (4 Pcs.) (9 builds)
Pyrodrone.com
$6.99

Misc Parts

Vifly Finder 2 Buzzer - Lost Drone Finder/Locater/Alarm (6 builds)
Pyrodrone.com
$12.99
Show stores (5)

Discussion

Sign in to comment

Longms   19 days ago  
1

I cannot seem to find the antenna mount on your thingiverse listings. any chance you could post that as well? thank you.

richrd   16 days ago 

hi, sorry for the late reply. This mount can be found here: https://www.thingiverse.com/thing:4572115/files

toonces   21 days ago  
1

Nice prints. Thx for sharing. One question... It looks like the air unit is mounted upside down, any particular reason you chose to do it that way?

richrd   20 days ago 

thank you! i am guessing because the output cable gets more clearance if its higher with the antenna print in place in looking at the pictures now, but i cant remember if it was done on purpose or not. Will work either way I am sure.

Guides & Reviews

58 4,608  47
30 days ago

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 2,682  19
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more