Micro Long Range build based on David_C frame with Vista
Really interesting and fun to build.
It fly perfect in calm air. Due to the lightweight set-up at 147gr dry it shows quite movement under windy conditions.
with 3s 1000mah I get circa 10min...planing to test 3s lion 18650...
Photos
Part List
Frame |
Project #MicroLongRange by Dave_C_FPV
(11 builds)
Thingiverse.com
|
See Site |
Flight Controller |
Flywoo Goku F411 2-4S 16x16 Stack/Combo (F4 FC / 13A ESC)Default Title
(7 builds)
Racedayquads.com
|
$39.99 |
Motors |
4 x FLYWOO NIN TINY NT1404 1404 3750KV 4850KV 2-4S Brushless Motor for RC Drone FPV Racing
(3 builds)
Banggood.com
|
$63.60 |
Propellers |
4 x GemFan Hurricane 4024 2-Blade 1.5mm Hub
(20 builds)
Airbladeuav.com
|
$15.96 |
FPV Camera |
Caddx Vista Digital HD System for DJI HD FPV
(98 builds)
Pyrodrone.com
|
$164.99 |
Batteries |
Gaoneng 11.4V 1100Mah 50C 3S HV 4.35V Lipo Battery XT30 Plug for RC Drone
(2 builds)
Usa.banggood.com
|
$16.14 |
3D Printed |
DJI HD FPV Camera Lens Protector Hood by harkal
Thingiverse.com
|
See Site |
Misc Parts |
MLR Vista antenna mount by Kushracer
Thingiverse.com
|
See Site |
nice ! i have almost similar build, but he is a little "shacky" in flight. how do you tune it ?
thanks! i notice this shacky flight under windy conditions but with no wind is stable. I did not tune. Just use flywoo betaflight defaults. I read similar isssue always in wind conditions. seems that the lightweight plus the deadcat configuration is particular sensible. do you have this behaviour also in calm air?
no effectively, only in the wind. thanks for your