A really thank you to my colleague Daniel that printed this for me!
Easy build except for the fact to try to solder really tiny pads on the v2 betafpv 12 amp FC....really less that half milimiter between. I matter of patience!
I used M1.6 3 bolts that fits nice on the PLA canopy.
On 1103 fly ok but I expect to replace them by 1202.5...meanhile really smooth relax flying on 2S.
Photos
Part List
Frame |
The Calimero 4K by Dave_C_FPV
(5 builds)
Thingiverse.com
|
See Site |
Flight Controller |
BetaFPV Toothpick F4 20A AIO Flight Controller 2S-4S
(18 builds)
Airbladeuav.com
|
$62.99 |
Motors |
4 x New Happymodel EX1103S 1103 6000KV 8000KV 12000KV 2-4S Brushless Motor 4 Holes Version for Sailfly-X Toothpick RC Drone
(3 builds)
Banggood.com
|
$39.96 |
Propellers |
4 pares Gemfan Hurricane 3018 3x1.8 3 Inch Hélice de 2 palas Soporte en T con orificio de 1,5 mm para RC Drone FPV Racing
(2 builds)
Es.banggood.com
|
See Site |
FPV Camera |
Caddx Vista HD Digital System 5.8GHz FPV Transmitter VTX FOV 150 Degree Camera 1080P Recording AIO Compatible DJI FPV Goggles Re
(212 builds)
Banggood.com
|
$163.99 |
Batteries |
Gaoneng GNB 7.4V 2S 450MAH 80C Lipo Battery XT30 Plug
(47 builds)
Banggood.com
|
$8.99 |
what is the all over weight?
With 2S 450mh: 84gr. Dry: 55gr...quite heavy being the sanchez canopy to allocate caddx tarsier...I use a tinyhawk camera.