Voici mon build mid range / long range
Frame Iflight XL6, moteurs Iflight Xing 1700kv et stack Diatone Mamba F722S
Je voles 6mn30 maximum avec Acehe 1500mah 6S 75C
Poids du drone complet (GoPro + lipo) : 747g
Un régal à piloter, trés bon comportement en l'air
Je met a disposition mes STL ainsi que le diff all Betaflight
Support viflyfinder v2 + TBS crossfire nano RX
Support GPS + antenne VTX
Support GoPro Héro 6 Black + filtres ND TBS
Support GoPro Héro 8 Black + filtres ND Telesign/PolorPro
Diff all Betaflight
For the english people :
Mid range / long range setup : Frame Iflight XL6, motors Iflight Xing 1700kv and stack Diatone Mamba F722S
Flytime 6mn30 max with Acehe 1500mah 6S 75C
Weight (GoPro + lipo) : 747g
Love to fly with it, realy good flight behaviour
Stl and diff all Betaflight 4.2 just above
Photos
Part List
Show stores (10)
Salut, bravo pour ton Long Range, il est super bien fini !! Je viens de terminer un build très similaire. Je l'ai flashé avec Inav. Je vois que tu es sous Betaflight. La position de ton beeper est intéressante, je ne sais pas trop où mettre le mien pour qu'il soit accessible : pour le stopper, tu passes à travers un trou de la top plate, c'est ça ?
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
i like your buzzer/rx holder idea
Thanks, there is a lot of space between the camera and the stack and i don´t see a lot a of people who use it. So i create mine. it´s realy flex and i use it on all my qwads
Hey, is there a chance to get a file for that? i mounted both with double sided tape but the Buzzer nearly "left the chat" already after a crash (my luck it was still hanging on the wire). i would be very thankful :)
All the STL files are in the description. Here is the direct link : https://www.thingiverse.com/thing:4586175
Oh, i have to be blind. Thank you and nice build by the way
No problem ^^ Thanks to you