my new racing frame has been developed to the point of been put into production.. on sale exclusively at https://www.phaserfpv.com.au in Australia.
the quad is a 20x20 only racing frame with an muliti part tool free pod system and an arm lock up plate to allow a proper one bolt system and a range of arm configurations when you build it. Its got 2.5mm sandwich plates either side of a 5mm arms thats 7.9mm wide at the narrowest part, this means the core of the airframe is super stiff and has a super clean noise profile allowing a nice lean filter tune. The frame is cut here in Australia, comes with a full stainless steel bolt kit that includes spares and 3 lock plates for a hybid, long X or squish build..
As a well developed racer it also comes with a really tight tune if its built to spec and by spec i mean flight controller.. right now there are a few 20x20 f7 flight controllers that stand above the rest in terms of gyro noise and in my testing ive found motor/ESC and prop combos are pretty irrelevant as long as your using really modern racing props ( in other words no Dal cyclons or other older designs )

CAD contruction clip