I have planed to build this frame for cinematic style or indoor video.
One of my frineds have had problem with 3inch with full gopro(around 120g) because motor get extremly hot over 1min flying. It's not super fast and acro style.
So i found this frame and motor. i compared between 1507 or 1408 motor(my friend's) and my motor (FPVCycle).
FPVCycle 2203 is not hot. it's just warm when i do acro-freestyle. Flight perfomance is not ultra super fast response such as 5inch but it's great handling with cinematic shot. I'm freed from worry. I like this pancake-shaped motor.
The frame is just normal. i just only ordred frame because i have 3D printer and i can make duck by my printing.
The motor is now super cool when i fly over 3 min also i reduced weight as i can do. Yes, i''m not doing acro-freestyle with this quad because it's made for cinematic. For this purpose, it's so great
In disadvantage, if the wind is strong, this quad is not quit flight perfomance. It' heavy weight(AUW is around 490~530 g) so i use reelsteady go with gopro 6 when the wind is too strong. Now i'm working on duck re-design for wind condition. The main thing is weight. Also, i tried 3.5inch prop. The flight perfomance is better than 3"
Anyway, I'm happy to get and build this quad.
Thanks!
I use still analog system so VTX is just 1 g so i can redue the weigh of AUW a lot!
It's around 490 g~ 530 g. it depends on what battery is used.
i recommend battery and prop:
4s with 3-blade outside
3s with 5-blade indoor (which is quiter than 4s 3-blade)
Build video (plz, turn on ENG subtitle)
After build and flight video (waterfall shot is not 3inch. it was 5inch quad)
Frame |
FPVCycle CineSplore Frame
(8 builds)
Fpvcycle.com
|
$49.99 |
Flight Controller |
HelioRC SPRING IMU-F Mini Flight Controller (20x20)
(3 builds)
Shop.brickracing.com
|
$39.90 |
ESCs |
Tekko32 F3 4in1 mini ESC(45A)
(5 builds)
Shop.holybro.com
|
$56.00 |
Motors |
4 x FPVCycle 23mm Short Motor - THE Cinewhoop motor
(36 builds)
Fpvcycle.com
|
$79.96 |
Propellers |
Gemfan 75mm Micro Ducted 3-Blade Propellers (Set of 4)
(6 builds)
Getfpv.com
|
$2.69 |
FPV Camera |
RunCam Micro Eagle
(323 builds)
Shop.runcam.com
|
$44.99 |
FPV Transmitter |
TBS Unify Pro32 Nano 5G8 V1.1
Myrcmart.com
|
$29.95 |
Receiver |
TBS Crossfire Nano RX Receiver (Super Micro - Smaller Than XM+)
Myrcmart.com
|
$24.95 |
HD Camera |
GoPro HERO6 Black 4K Action Camera (Renewed)
(33 builds)
Amazon.com
|
$278.99 |
Video Receiver |
TBS Fusion
(44 builds)
Team-blacksheep.com
|
$129.95 |
Radio Module |
TBS Crossfire Micro TX V2
(154 builds)
Team-blacksheep.com
|
$69.95 |
What kinda flight time do you get out of this thing? I'm new to cinewhoops so excuse the question if its really stupid: is it possible to make a "longe range" cinewhoop cruiser? Want to kill two buirds with one stone. Thanks!
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Hi, can you share your PIDs, if you dont mind?
sure, it's in my car so let you know when i get there soon :) but i think it was almost default.