FlowX V2

By FPVFrame.ch on Oct 17, 2020

4  132  0

The FlowX V2 is made for shooting Cinematic FPV Footage.
The most important feature is the tiltable GoPro mount. The Pod design allows accurate positioning to catch the best shot.
Its optimized for 20×20 hardware so its rather slim compared to its predecessor. The front Pod is soft mounted to absorb vibrations and act as a shock absorber in crashes. Thanks to its rigid 6mm Mainframe stiffness and durability are maximized. Arms can be easily swapped by removing 2 screws.

225mm diagonal
optimized for 20×20 hardware, 30×30 possible
Weight: ca. 120g
adjustable Gopro mount
DJI HD compatible
19mm (analog) or 20mm (HD) camera Size
20mm build height
WideX
Top mounted LiPo
Smooth edges
TBS Immortal T Mount
Many 3D printed Accessories

Photos

Part List

Frame

FlowX V2
Fpvframe.ch
$105.00

ESCs

Aikon AK32PIN 4-in-1 35A 6S 20x20 "VERSION 2" (8 builds)
Pyrodrone.com
$59.00

Propellers

Gemfan 51466x3 Hurricane Durable (4pcs) MCK (50 builds)
Pyrodrone.com
$3.29

FPV Transmitter

DJI FPV Air Unit (4 builds)
Rotorgeeks.com
$259.00
Show stores (3)

Discussion

Sign in to comment

Guides & Reviews

79 8,891  67
Aug 26, 2020

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more
36 3,211  27
Jul 20, 2020

Until recently GoPros were delegated to larger quads. A typical GoPro weighs around 125g and we've only recently begun to mount them on 3" cinewhoops. Even that is a stress on the motors. Now we've got the "GoPro Lite". Remove the battery, displays and casing and you're left with a small, lightweight board and sensor. Wrap it in protective TPU casing and you've got a 30g micro GoPro. The Hero6 is..

Read more