Blackout BangGod

By FPV Zone on Nov 29, 2020

9  168  3

This is our blackout version BangGod. These builds all start after a lot of research and we are very specific on what components we use together. Each component is conformal coated down to the receiver before being shrink wrapped and TBS Unify Pros are taken apart moded which we dont talk about and then coated with conformal coating before being put back together. We solder absolutely everyrhing and use no plugs for longevity and durability. All wires are run in the best specific places to reduce noise and interference being introduced to nothing along with all are shrink wrapped to keep shape. We do things in a way that cant be completely discussed but the final product is more shock resitant, water resitant and heat resistant than the competition. We use all treated hardened metal hardware and yes this adds a small amount of weighy but these are designed to be bando bashers and have plenty of power to rip to an extent most are very surprised. We take the time and use the experience with electronic egineering training to build all of our quads in ways the competition will not. We build the Porsche's of the drone racing and freestyle industry and provide real professionally built products!
Build Components Below:
We will list here because we purchase all of our parts from the manufacturers directly and not going to bump other companies or competition.

1.Catalyst Machineworks BangGod 5"inch Frame
2.Matek f722se flight controller
3.Hobbywing 60Amp 4in1 ESC
4.Hobbywing Pro Xrotor Series 2207 1750kv 6S
5.Foxeer Predator V5 Camera
6.TBS Unify Pro32hv VTX (mod)
7.TBS Nano Receiver w/immortal T
8.VAS Minion Pro Shorty Antenna
9.Hardened Treated Lightened Hardware
10.8 years of electronics egineering training

Thanks for checking some of our builds out!
Email me with any questions at:



Sign in to comment

Silverwing   Dec 09, 2020  

Where did you get the arm protectors for the frame? I've been looking everywhere and i couldn't find one like that anywhere!

FPV Zone   Dec 09, 2020 

We use the arm guards for the smooth operator and then modify the rears to fit the builds not using the rear brace. When using the rear arm brace also these will fit perfectly and look great! Let me know if you want the files and I will be happy to share but can be found online. Thanks!

Silverwing   Dec 13, 2020 

Thank you for your response!

Guides & Reviews

32 4,841  51
Nov 19, 2020

FPV has had quite a journey. Just a few years ago we started racing drones around a track and doing flips over trees, but professional cinematic FPV is a more recent development. DJI has always owned the drone photography market, but smaller acrobatic drones are starting to enter the market. They have the advantage of close proximity flight indoors and around people. There's more artistic freedom and..

Read more
Aug 26, 2020

For the longest time we've been limited to 3 to 4 minutes of flight and lots and lots of batteries. With more efficient motors and frame designs it's now possible to push the envelope much further. This guide will walk you through the process of building a micro long range quad capable of flying 8-30 minutes and more than 4km. The build is moderately difficult, but with the right tools and steady hands..

Read more