Covid > bored > disassemble the 75 x for a fresh start.
Removed all plugs and soldered wires + custom tpu print
Frame | 
					LETHAL CONCEPTION – SR NANO
					 Raceparts.fr 
					 | 
					$25.00 | 
Flight Controller | 
					F405 Brushless Flight Controller
					(13 builds)
					 Betafpv.com 
					 | 
					$16.99 | 
ESCs | 
					4 x F405 Brushless Flight Controller
					(13 builds)
					 Betafpv.com 
					 | 
					$67.96 | 
Motors | 
					1103 Brushless Motors
					(35 builds)
					 Betafpv.com 
					 | 
					$23.99 | 
Propellers | 
					Gemfan 40mm 4-Blade Propellers (1.5mm Shaft)
					 Betafpv.com 
					 | 
					$2.50 | 
FPV Camera | 
					Banggood.com
					 Banggood.com 
					 | 
					See Site | 
3D Printed | 
					Beta75x 2S revival by K_thod_v2
					 Thingiverse.com 
					 | 
					See Site | 
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
That's a neat canopy design! Is it two prints attached at the camera screws?
yep, 2 separated prints. .. top one is attached on cam and to the back on the other ( see thingiverse link)