GTR 3469 Caddx Turtle v2, TBS Unify, TBS CRSF
My goto 4s - 6s pocket rocket with dvr, gps, and lost model alarm
Frame |
Diatone GTR 249/249+/349 HD V2 MK2 Bottom Plate/Damping Accessories Package
Aliexpress.com
|
$6.99 |
Flight Controller |
MAMBA F405 MK2 Betaflight Flight Controller F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC
(193 builds)
Banggood.com
|
$42.99 |
Motors |
4 x MAMBA 1408 4000KV 3-4S Brushless Motor For Diatone GT R349 FPV Racing RC Drone
(24 builds)
Banggood.com
|
$59.96 |
FPV Camera |
Caddx Turtle V2 1080p 60fps FOV 155 Degree Super WDR Mini HD FPV Camera OSD Mic for RC Drone
(73 builds)
Banggood.com
|
$71.28 |
FPV Transmitter |
TBS Unify Pro 5G8 HV (SMA)
(596 builds)
Getfpv.com
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Awesome.. How does you guys make these pods.. I always fail every time i try to just make a simple pod..
TPU takes serious time and patience. Its not just about the hot end but also very environmental and material freshness dependent.
Yeah TPU is fun to print, but i meant how it is designed...
Everytime i try to make a pod it ends up looking like an accident xD
Sounds like your hotend maybe running hotter than needed and or print speed to fast.
No, no, I can print TPU fine, i just cannot design pods like this xD
Is it your design?
No I found it on thingyverse a while back ago. I remember that it was listed under GTR349 though.