Tadpole 2.5 HD

By k_thod on Feb 01, 2021

5 363 3

Fan of Armattan frames ..bored as sh..t with the confinement = 2.5 inch HD quad .

Goal here was to keep the frame intact as much as possible and it ended up being a nightmare to make everyhting fit .

Final weight is 100 gr without batt with a 5 amps consumption stationnary hovering ... now lets wait for the sun to test it for real

Cons. of this build:

not enought UARTs to get current sensor from the Esc (only 2 onboard)
USB ports are totally not usaeable whitout unmounting the caddx
R9 mm is near the caddx, i hope the heat won't be an issue
probably other issues incoming when flying in real conditions

But fun to build :)

Photos

Part List

Frame	Armattan Tadpole 2.5" FPV Frame (26 builds) Getfpv.com	$34.00
Flight Controller	Light F4_Flight Controllers_FPV_T-MOTOR Store-Official Store for T-motor drone motor,ESC,Propeller Store-en.tmotor.com	See Site
ESCs	4 x Cinematic F30A 6S 4IN1_ESC_FPV_T-MOTOR Store-Official Store for T-motor drone motor,ESC,Propeller Store-en.tmotor.com	See Site
Motors	4 x NEW! Xnova FPV T1204 motor series. 4000kv_5000kv \| XNOVA MOTORS Xnovamotors.com	See Site
FPV Camera	Caddx Nebula V2 Nano Digital HD VTX Air Unit Kit for DJI (47 builds) Pyrodrone.com	$134.99
Receiver	FrSky R9MM OTA SBUS Long Range 900MHz Micro Receiver - For At RaceDayQuads (87 builds) Racedayquads.com	$17.33
3D Printed	Tadpole CaddxVista by K_thod_v2 Thingiverse.com	See Site

Show stores (6)

Like Copy Part List Follow k_thod

Discussion

Mountainlovingsurfer Feb 01, 2021

Very Cool Build , its just so tight a !!. what are those Props Like ?

k_thod Feb 04, 2021

Not yet tested outside..only hovers in the living room but i have the feeling those motors may not be as powerfull as i want ..wait and see

k_thod Mar 09, 2021

Now that i tuned it and flew a bunch of lipos, it is just awesome ... those props are ok and flight characteristics are what i was waiting for..
In the end, the only down side of it is the FC usb port not beiing easely accessible

Guides & Reviews

120 22,060 41

Build a 5" Long Range Drone - Transformer Ultralight

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

73 17,609 66

Build a DJI FPV Cinewhoop - QAV-CINE Freybott Edition

Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Guides and Reviews