I chose to go with Apex Racing 1303.6 7777kv so I could get good performance out of 2s and 3s for around the block ripping. No issues or anything really noteworthy with the build. Things went together pretty well. I did use finger lock nuts and a TPU VTX/FC spacer which worked out really well. The UFL antenna that came with the VTX was trash and all I had on hand was a Rush Cherry auxi UFL antenna. However it worked out really well. Currently have the VTX set to 200mw and have no issues racing around my place. I did do a range check at 400mw and its is almost comparable to TBS 400mw.
2/26 Update
Neglecting build notes here as Ive been waiting for something to give on this and force me to decommission this build for an updated one which I already have the parts for but will require stripping this build. This AIO will be moved to a new build and replaced with a 13amp AIO. I will also be swapping out 2mm carbon for 3mm. I have had one damaging crash on this build which bent a motor pedestal and tweaked an arm a bit. Ive been flying the crap out of it since then and even though prop alignment is visibly off with one motor I have seen no other noticeable issues in flight or performance. I do have a replacement motor just in case though. I’m not sure if I will be keeping the VTX/DVR combo even though I have three becuase I've started to favor the eachine nano v2 for all of my micros.
Photos
awesome build I have the jhemcu pro 35A and was wondering if you were able to get it flashed to betaflighg 4.2 and if so what was the target you used I had to use flywoo411
Thanks it us a fun one! I was just flying it this morning so was already out for me to check. Tried to add a screen capture to the reply but for whatever reason its not attaching. Configurator: 10.7.0 Firmware: BTFL 4.2.0 Target: JHE/JHEF411 (STM32F411) Sorry I do not recall what it came flashed with but I do recall when I did the update it auto-populated the target for me and I only had to adjust the version drop down. Hope that helps and happy rippin.