Finally after months of waiting I was able to snag a FPVCycle 1S Flight Controller and complete my first BabyTooth build.
Even with the small size of everything the board layout made soldering surprisingly easy.
Photos
Part List
Frame |
FPVCycle BabyTooth Frame (CHOOSE THICKNESS)
(56 builds)
Fpvcycle.com
|
$11.99 |
Flight Controller |
FPVCycle 1S-2S AIO
(18 builds)
Fpvcycle.com
|
$55.99 |
Motors |
4 x FPVCycle Light 13mm 1S Motor- 2mm prop shaft
(40 builds)
Fpvcycle.com
|
$53.96 |
Propellers |
Gemfan 3018 Props (4CW + 4CCW) - 2mm
(47 builds)
Fpvcycle.com
|
$1.29 |
FPV Camera |
Caddx Ant Lite 4:3 FPV Camera - FPVCycle Edition
(73 builds)
Fpvcycle.com
|
$13.99 |
FPV Transmitter |
PandaRC Nano 16x16 5.8GHz 25-400mW VTX - U.FL
(12 builds)
Fpvcycle.com
|
$20.98 |
Receiver |
ImmersionRC Ghost Atto 2.4GHz Micro Receiver w/ qT Antenna
(21 builds)
Racedayquads.com
|
$29.99 |
Batteries |
GNB 1S LiPo Battery 600mah XT30 (Three-Pack)
(8 builds)
Fpvcycle.com
|
$16.99 |
Nice build! I just built a very similar rig. Soooo much fun to fly.
Hey what's that little black piece you have on top of the qTee antenna?
It is part of the BabyTooth frame. Makes it nice and easy to secure the qTee and miniT antennas with a rubber band or zip tie.
Oh cool. I built mine with the Sanchez Air frame so it doesn't have that.