Wanted to build a digital long range / freestyle cruiser capable of carrying bigger lipo batteries. I loved the geprc crocodile but it was fragile. So I contacted my favorite frame builder/designer @Kinfpv for this special project.
This is a custom Kinfpv 7" Theory dead cat frame specifically designed for carrying bigger 4s & 5s 3000 - 5000mah sized lipos.
Features a Geprc F7 Span HD Stack
Geprc 50A 32-bit Esc
DJI FPV Airunit with 1200mw Hack
20cm Caddx Vista camera cable
TBS Crossfire Nano Rx
2806.5 Brother Hobby Avenger Motors 1700kv
Beitian 220 GPS Module
Vi-fly Buzzer
TinyLeds Infini Rainbow LEDs
Gopro Hero 7 Black
Dalprop 7" Fold propellers
if you're interested in this frame dm @kinfpv on IG let him know SD_AE86 referred you.
Follow me on IG @SD_AE86
Photos
Part List
Flight Controller |
GEPRC Span F722 HD 30x30 Flight Controller for DJIDefault Title
Racedayquads.com
|
$39.99 |
Motors |
BrotherHobby Avenger 2806.5 Motor - 870KV/1300KV/1460KV/1700KV
(30 builds)
Getfpv.com
|
See Site |
Propellers |
2 Pairs Dalprop Fold 2 F7 7 Inch Folding Propeller Smooth DIY Props Long Range Compatible POPO for FPV Racing RC Drone
(2 builds)
Banggood.com
|
$5.29 |
FPV Transmitter |
DJI Digital FPV Air Unit Video Transmission Module
(121 builds)
Racedayquads.com
|
$99.00 |
I love the led mounting, how did you wire it?
I am using an Iflight 5-12v BEC to connect to the battery & ground, only the LED signal wire is going to the flight controller to program sequence & to avoid pulling too much power from the FC.