Small update to my 59mm brushless nano. Switched over to a Mob6 canopy, and plastic hardware which led to almost a 2 gram weight reduction. Also decided to try out the HQ tri blade props. Love ripping this thing around the house. Original build can be seen here https://rotorbuilds.com/build/25417
Photos
Part List
Frame |
31mm prop frame
(3 builds)
Armattanproductions.com
|
$5.00 |
Flight Controller |
BETAFPV F4 AIO 1-2S Brushless Flight Controller No RX 5A ESC Integrated 25mW VTX with BT2.0 Connector for 1-2S FPV Brushless Who
(2 builds)
Amazon.com
|
$1.00 |
Motors |
BETAFPV 0802SE Brushless Motors (4 Pcs) - 19500KV/22000KV
(6 builds)
Getfpv.com
|
See Site |
Propellers |
HQProp 31MMX3 3-Blade Whoop Propeller (1mm Shaft - Set of 4)
(3 builds)
Getfpv.com
|
$2.25 |
FPV Camera |
AKK C1T Super Mini 5.8GHz 25mW FPV Transmitter 600TVL Micro AIO Camera Only 2.8g with Dipole Antenna for FPV Drone
(21 builds)
Amazon.com
|
$19.99 |
Receiver |
FS-RX2A Pro 2.4GHz Micro Receiver - FlySky Compatible - Choose Your VersionPlug & IPEX Antenna
Racedayquads.com
|
$8.99 |
Batteries |
4 x NewBeeDrone Nitro Nectar Gold 250mAh 1S HV LiPo Battery (4 Battery)
(12 builds)
Newbeedrone.com
|
$85.96 |
Misc Parts |
Happymodel Mobula6 Canopy
(9 builds)
Getfpv.com
|
See Site |
I like nano sized quad. I wonder whats the flight time of this build?
On 250mah NBD Nitro Nectar Golds I get close to 3 minutes of aggressive flying.
Thanks for the info. I just noticed you used this build as your profile pic. You must love it :P. Also, i wonder why you didnt use solid pin ph 2.0?
You're welcome! That was the only connector I had at the time. I have some solid pin connectors in my parts bins now and will be changing it as soon as this one wears out. I do love flying this build. It is my all time favorite house and backyard bird.