3D printed 75mm frame. Frame was designed for 7 or 8mm motors. I printed the 8mm version and used a dremel to open up the motor mounts a bit for 8520 motors. Fly's much better than it did as a 75mm Whoop.
Frame |
No-Ducts 75mm beta 7mm/8mm motors by makesomemore
Thingiverse.com
|
See Site |
Flight Controller |
WHOOP Lite Brushed Flight Controller Board Built in Bayang Protocol RC Quadcopter Part
(2 builds)
Aliexpress.com
|
$11.87 |
Motors |
8pcs 8520 Motor 8.5x20mm 15000KV Brushed Motors 4CW 4CCW Coreless Motor with JST-1.25 Connector for D JI Ryze Tello 720P Camera
(7 builds)
Amazon.com
|
$15.98 |
Propellers |
BETAFPV Gemfan 16pcs 40mm 3-Blade Props with 1.0mm Shaft for 75mm Frame Tiny Whoop Drone like Beta75 Pro 2 etc
(5 builds)
Amazon.com
|
$11.99 |
FPV Camera |
Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 25mW FPV Transmitter with Dipole Brass Antenna Combo for FPV Quadcopter
(23 builds)
Amazon.com
|
$14.39 |
Batteries |
OVONIC 4 Packs 450mah 1S1p 3.8V 80C HV Lipo Battery Pack with JST PH2.0 for Blade Inductrix FPV
(6 builds)
Amazon.com
|
$69.99 |
Misc Parts |
NewBeeDrone BeeBrain Goober Canopy - Multiple Colors
(36 builds)
Newbeedrone.com
|
$3.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Please share your stl file. Thanks
.stl file for the frame is posted above in the parts list.
if you'd like a 8520 very hit me up!