This neat little frame from T-Motor was previously in one of the FPVcrate boxes.

Super light weight but makes builds difficult due to the cramped spaces, leaving very little options for stacks and utilizing digital systems.

So time to get creative.... to create some space I designed a camera mount/spacer to raise the canopy about 6mm and to utilize nano or full size micro cameras on the caddx vista with full tiltability.

For the rear canopy, I made a Led Tailight/capacitor mount/spacer to raise the rear canopy space 6mm. I ditched the original VTX antenna mount and created a a vista antenna holder that zipties inplace where the stock turtle mode fin originally goes leaving more clearance between the canopy & flight controller and wider gap than your Ex girlfriend.

Im utilizing the DJI digital fpv controller to lessen wiring and additional rx mounts as this has plenty of range for a race quad.

Added BN-180 Gps for telemetry speed data purposes only & have left failsafe/ rescue modes switched off.

A skystars F722HD flight controller & 60A 32bit 4-in-1 esc is at the heart of this quad. Its an excellent flight controller at a budget price that I have been using in different builds. I would compare its quality equivelent to the regular mamba series stacks in my other builds. Highly recommend these in you are trying to keep costs down and so you dont have to put your kidneys on ebay.

T-motor Velox V2 2306 2400kv motors powered by CNHL Ministar 4s 1500mah 120c gives this quad plenty of gogo juice & keeps the weight down.

Quad weight is :376g
quad weight with lipo: 496