Put this little guy together this morning while I was waiting for batteries to charge. Frame is the NFE Boss 6 that I sliced a few layers off of to get a lighter build. It isn't as stiff now, but I have flown it into the wall a few times at full speed without breaking it. I printed it in PLA+ and for the weight I believe it will be plenty strong enough. If I do manage to break it, I can just print another one in under 30 minutes.
Frame |
NFE Boss 6 Micro FPV Drone Frame by OptimaZe
Thingiverse.com
|
See Site |
Flight Controller |
Whoop Lite Mini Brushed Flight Control Board with Power Cable
(10 builds)
Ebay.com
|
$15.95 |
Motors |
NewBeeDrone BDR SILVER Edition - 6mm Brushed Motor
(13 builds)
Newbeedrone.com
|
$8.99 |
Propellers |
NewBeeDrone Venom V2 Super Durable Propellers 31mm -0.8mm Shaft (4CCW+4CW)
(18 builds)
Newbeedrone.com
|
$2.99 |
FPV Camera |
AKK C1T Super Mini 5.8GHz 25mW FPV Transmitter 600TVL Micro AIO Camera Only 2.8g with Dipole Antenna for FPV Drone
(21 builds)
Amazon.com
|
$19.99 |
Batteries |
NewBeeDrone Nitro Nectar Gold 250mAh 1S HV LiPo Battery (4 Battery)
(12 builds)
Newbeedrone.com
|
$21.49 |
Misc Parts |
Happymodel Mobula 6 Canopy
Newbeedrone.com
|
$2.99 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Nice build. How did you manage to attach AIO camera to mobula canopy?
I use E6000 adhesive to install most of my cameras in Mob6 and NewBeeDrone Goober canopies. It holds very strong, and is still pretty easy to remove if replacement is needed.