3.5 inch Armattan Tadpole Analog - with GEPRC Camera Mount - 12mm Motor Pattern
By DronerFPV on Dec 02, 2021
DronerFPV designed with Armattan Productions a 3.5 inch Armattan Tadpole main and LiPo plate.
For this design, we redesigned for:
12mm motor mount pattern with increased area around the motor mounts for more crashing beefyness. Used the BetaFPV 1404 3800kv for zippyness and longer flight time.
You can use the GEPRC or Tadpole (with spacers) camera mounts
2-23mm rear stand-offs which allow for a TPU antenna and crossfire mount
Order the Armattan Tadpole Analog 3.5 inch - 3mm Main Plate and LiPo Plate Conversion Kit Below
1 x ARMATTAN Tadpole 3.5-inch Analog - 20x20 or 25x25 flight controller and 3mm plate thickness with 12mm motor mounts (Main Plate).
1 x Armattan Tadpole Extended LiPo Plate
Photos
Part List
Show stores (6)
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
Very interesting! This kit is compatible with the stock tadpole hd aluminium cam brace/tail post ?
I didn't understand if I can use the standard aluminum parts of the tadpole and if I need the tadpole 3inch or 3inch hd ones.
Thanks
Yes, it is designed to use the stock aluminum camera mount for the tadpole analog. You can use the HD tadpole mount but the camera is mounted too far back in the brackets and you see the brackets. Depending on the height of the back standoffs, you may need to add a nut or other spacer on the top and/or bottom of the tadpole analog camera mount.
Thanks! So if i use standard tadpole aluminium camera mount and back standoff i shouldn't use any spacer, right?
Thats correct. Only need spacers if you want more height between the base and LiPo plate