Another 3D printed Whoop Lite Silverware build. This is probably the quietest kwad I've built yet. At full throttle it's barely a whisper in the air which means I can fly it around the house all hours of the night without disturbing anyone. The 3D printed canopy is a bit heavy for this build so I may order another NBD Goober or Mob6 canopy to replace it.
Photos
Part List
Frame |
Micro frame drone by Eikichi
Thingiverse.com
|
See Site |
Flight Controller |
Whoop Lite Mini Brushed Flight Control Board with Power Cable
(10 builds)
Ebay.com
|
$15.95 |
Motors |
NewBeeDrone BDR SILVER Edition - 6mm Brushed Motor
(13 builds)
Newbeedrone.com
|
$8.99 |
Propellers |
XiaoPengYo Mini Rc Quadcopter Mini RC Drone Propeller Blade for HS210 Mini Drone SP350 H36 F36 T36 NH010 E010 Spare Parts
(2 builds)
Amazon.com
|
$7.99 |
FPV Camera |
AKK C1T Super Mini 5.8GHz 25mW FPV Transmitter 600TVL Micro AIO Camera Only 2.8g with Dipole Antenna for FPV Drone
(21 builds)
Amazon.com
|
$19.99 |
Batteries |
NewBeeDrone Nitro Nectar Gold 250mAh 1S HV LiPo Battery (4 Battery)
(12 builds)
Newbeedrone.com
|
$21.49 |
3D Printed |
Toothpick Nano Pod Lite [14mm] by Dave_C_FPV
(13 builds)
Thingiverse.com
|
See Site |
Nice one! I'm using this canopy in my whoops: https://www.thingiverse.com/thing:4968826 , it's practically weightless, but it's for 1.4mm screws.
Thanks for the link. I remember seeing that one but forgot about it. Gonna have to pull out some TPU and give it a try.