Another great frame design by fellow rotorbuilds member Thomas Parker. Quick and easy print that is only 60mm motor to motor. You can see in the image below that it is even smaller than Tiny Kwad. Awesome flying little indoor frame.
EDIT- 1-31-22 A couple minor tweaks to the Bitsy frame. Inner hole diameter of the FC mounts has been reduced to allow the use of standard Whoop canopy mounting screws rather than m2 hardware and standoffs. FC mounts have been modified to be a couple mm taller than the frame for easy rubber band installation and ease of assembly.
Thanks Thomas! If performs even better now and the completed build is several grams lighter.
Photos
Part List
Frame |
Bitsy 60mm (brushed) by makesomemore
Thingiverse.com
|
See Site |
Flight Controller |
Whoop Lite Mini Brushed Flight Control Board with Power Cable
(10 builds)
Ebay.com
|
$15.95 |
Motors |
NewBeeDrone BDR SILVER Edition - 6mm Brushed Motor
(13 builds)
Newbeedrone.com
|
$8.99 |
Propellers |
NewBeeDrone Venom V2 Super Durable Propellers 31mm -0.8mm Shaft (4CCW+4CW)
(18 builds)
Newbeedrone.com
|
$2.99 |
FPV Camera |
AKK C1T Super Mini 5.8GHz 25mW FPV Transmitter 600TVL Micro AIO Camera Only 2.8g with Dipole Antenna for FPV Drone
(21 builds)
Amazon.com
|
$19.99 |
Batteries |
NewBeeDrone Nitro Nectar Gold 250mAh 1S HV LiPo Battery (4 Battery)
(12 builds)
Newbeedrone.com
|
$21.49 |
3D Printed |
Adjustable Angle Whoop Canopy [Remix of Tiny Whoop - Mobula 6 - Canopy ] by nerdCopter
(7 builds)
Thingiverse.com
|
See Site |
can you link the files for the frame please.
I will get the stl file added soon.
hi quick question is it possible to add a different reciever for the flight controller in parts for Meet Bitsy The 3D Printed Nano Kwad? also do you have to setup wnything in betaflight
There is a way to add an external RX to that FC but I have never tried it. The FC is running NFE Silverware firmware so it is not compatible with Betaflight. Any Whoop style Betaflight FC will work in the Bitsy frame though.
how do you acess the nfe silverware firmware
Any firmware changes or settings changes are done using an ST-Link. I really like the stock firmware on the FC's linked in the build parts list so I have never made any changes to these particular flight controllers. I just plug everything in, bind to the RX and fly. Flight modes, rates, and what not can all be changed via transmitter stick gestures. Here is a great source of information for Silverware firmware https://github.com/NotFastEnuf/NFE_Silverware
can you link the frame now
Sent you a message.