the King V2 - 6 inch
By CrissCross FPV on Apr 28, 2022
The King V2 - ultimate and one-of-a-kind collector’s item!
We created the original King frame to compete in the 2019 Drone Champions League. The frame gained a lot of attention and helped the Drone Sports team to get 3rd place overall. The King V2 - the new version of the FPV drone racing frame is here to continue its success.
The frame has vertical arms construction. We added braces between arms to increase stiffness and reduce low-frequency vibrations. The vertical arms are fixed between two main horizontal plates. The top plate has been cut at 45 degrees for increased torsional stiffness.
Battery is located inside of the main body, very close to center of the mass. Such battery positioning helps lowering inertia in sharp turns, allowing easy and fast rolling.
Electronics are positioned on the top plate, protected from above with the canopy. The canopy can be opened in same manner to the car’s hood with just 2 screws removed.
We tried to bring feeling of the novelty and freshness to the FPV scene. Let us know what you think about the frame. Thanks.
Photos
Part List
Frame |
THE KING V2 - State of Art 6 inch FPV Drone Racing frame — crisscrossfpv
(2 builds)
Crisscrossfpv.com
|
$109.00 |
Flight Controller |
MATEKSYS F405-MiniTE Flight Controller - Mini 20x20
Getfpv.com
|
$59.99 |
ESCs |
MAMBA F45_128K BL32 4IN1 ESC 45A 6S
Diatone.us
|
$45.99 |
Motors |
T-Motor F80Pro 2408 - 1900kv
(3 builds)
Drone-fpv-racer.com
|
See Site |
Propellers |
Gfprops.com
Gfprops.com
|
$3.69 |
FPV Camera |
Caddx DJI Digital HD FPV Camera
(164 builds)
Getfpv.com
|
See Site |
FPV Transmitter |
DJI Digital HD FPV Air Unit Module
(121 builds)
Getfpv.com
|
See Site |
Antenna |
TBS Triumph Pro (LHCP SMA)
(4 builds)
Team-blacksheep.com
|
$19.95 |
Receiver |
TBS CROSSFIRE NANO RX (SE) - FPV LONG RANGE DRONE RECEIVER
(412 builds)
Team-blacksheep.com
|
$29.95 |
Great frame!!
For maximum flight speed, would you recommend these motors in 1900kv or even 2200kv version?
I like this new design and have already ordered this frame.
Is this Gopro mount and Cap Holder included?
Such a visually dynamic and interesting design! I love all the details, like the repetition of the star shape, and the antenna mount at the back. The carbon side plates look great with the TPU, there is room to grow in the design there, I hope lots of ppl build it!
Guides & Reviews
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read more
With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
How much is dry weight? Thanks!