Now with Fettec 15a AIO and Flywoo 1203 pro motors. This is a second build on the premise of extended wheelbase on a whoop but lightweight. Warpig frame (can take a fettec 15a aio in slotted x) with 114mm wheelbase from CNCDrones. Prop guards on amazon from the sektor 25 from HGLRC. HGLRC 1202.5 motors at 11,600KV - 2S. HDZero whoop light and thats about it. Really clean build. Gemfan 2540's and fullsend 450mah 2S with newbee drone savagebee battery strap and BQE pickpocket canopy. Everything together less than 100g's was the goal. After getting frustrated with plastic whoop frames, namely the beta95, and limited FC options I went this route. That and read that whoops suffer from bad air underneath and extending wheelbase can solve. Seeing if I can go 2S and still maintain flickability.

It flies as expected. I have not flown enough this year to show as skilled. Mostly combatting a wind but it is flickable and can pop off the ground when needed. May recommend GNB550mah 90c 4.2v. Even though heavier the power differennce is quite noticable.
https://mega.nz/file/JcRWmJaY#O9qWxjrmrN294qTuvvcW1LglnXAeOQeIvO1CTBafsZ4