NakeX 2.5" V2
By FPVFrame.ch on Oct 12, 2022
Finally took the time to upgrade our NakeX 2.5" and 2" frames with some new ideas.
- New XT30 mounted to the frame. Much easier to replace and plug in the Lipo.
- New GoPro mounts for flywoo GP11. Slide in from the right, more stiffness and easier to detach from the drone.
- New cable organizer in the front. DJI camera cable is secured to the frame to prohibit the propellers from damaging the cable.
Available as BNF or Frame only in 2.5" and 2"
https://fpvframe.ch/fpvx/product/nakex-hd-bnf/
https://fpvframe.ch/fpvx/product/nakex/
Download all the new STLs from thingiverse. An XT30 mounting plate is needed to secure the XT30 to the frame (included in the shipping content of the frame).
https://www.thingiverse.com/thing:4126415
Photos
Part List
Frame |
NakeX - FPV Frame
(3 builds)
Fpvframe.ch
|
$65.00 |
Flight Controller |
JHEMCU 6S 40A Pro AIO - FPVFrame.ch
(3 builds)
Fpvframe.ch
|
$85.00 |
Motors |
XNova 1404 3800KV (4pcs) - FPV Frame
Fpvframe.ch
|
$70.00 |
Propellers |
GEMFAN D63-3 - FPV Frame
Fpvframe.ch
|
$3.50 |
FPV Transmitter |
CaddX Vista Nebula Pro - DJI HD Digital FPV Video Link - FPV Frame
Fpvframe.ch
|
$185.00 |
Receiver |
TBS Crossfire Nano RX SE - FPVFrame.ch
(2 builds)
Fpvframe.ch
|
$32.00 |
Batteries |
Tattu 4S 650mAh - FPV Drone LiPo Battery - FPV Frame
Fpvframe.ch
|
$26.00 |
What flight time do you get? Is there performance advantage of going pull vs pusher configuration?
with a 4s 650 around 3-5 minutes depending on the flying style. We prefer to use build as puller but the frame is ready for pusher config also. the vertical weight distribution is better in theory for pull config, have yet to do a 1:1 comparison.
Really looking forward seeing 1:1 comparison to see if push vs pull performance different.