This build is for smooth flying while filming with a Bones 10. No flips, rolls, etc, hence the tame rates. I am very impressed at how smooth it flies and pretty much vibration free as you can see from the osd footage in the video. I do have sorbothane under the Bones.

Instead of mini Immortal T(which was going down to LQ 1:85} i switched to the L zip tie configuration and now the LQ barely dropped below LQ 1:100 going out 4,000'

The video was filmed at 10,000' and tested with 3 & 4s batteries. The 3s were very lethargic with no real power but flew well. The 650mah 4s is perfect lots of power and flight time with bones @ 4 minutes.

The video was filmed at 10,000' and tested with 3 & 4s batteries. The 3s were very lethargic with no real power but flew well. The 650mah 4s is perfect lots of power and flight time with bones @ 4 minutes. For 3s throttle mid is at 53

9.6.23

This flies so good that my Impulse Alien 3" is now shelved.

Update 8.31.23
I went to install the included go pro mount and it is designed for the regular gopro mount, not the bones 10. i cut out the middle tab and put in spacers, seems solid.

Volador VX3 Freestyle 3"
Diatone MAMBA MK4 F722 MINI + F40A 3-6S 128kHz
TBS Nano
TBS Unify Pro32 Nano
XNova T1404 FPV Racing Series Motor - 3800KV
TBS CROSSFIRE NANO RX
TBS MINIMORTAL V2 T ANTENNA
TBS UNIFY PRO32 NANO 5G8
Lumenier Micro AXII 2 5.8GHz Lite U.FL Antenna
Foxeer T-Rex Micro 1500TVL CMOS 4:3/16:9 PAL/NTSC FPV Camera
TATTU R-LINE 650MAH 14.8V 95C 4S1P LIPO BATTERY PACK WITH XT30
HQ Prop T3x3x3