This build was created specifically to run Racekraft 5038 biblades on Rebel 2205 3000kv motors, pushing the upper limits of 5in speed. The lightweight, low-drag Roosh frame is a perfect fit. Very responsive, very punchy and very fast.
Photos
Part List
Frame |
Roosh 5L - 4mm & 5mm
(6 builds)
Florotors.com
|
$65.00 |
Flight Controller |
RADIANCE Flight Controller - Light Up The SkiesSKU: FPV-Radiance
(15 builds)
Furiousfpv.com
|
$29.95 |
ESCs |
Aikon SEFM 30A 4-in-1
(19 builds)
Getfpv.com
|
$68.99 |
Motors |
4 x 2205 3000kv Pro Series
Rebelminiquads.com
|
$99.96 |
Propellers |
5" Double Blade Propellers 5038DCS (Double Crane Style)
(26 builds)
Racekraft.com
|
$3.49 |
FPV Camera |
Rotor Riot Special Edition RunCam Swift
(144 builds)
Store.rotorriot.com
|
$39.99 |
FPV Transmitter |
Diatone SP3 Stackable VTX with OSD and 600mw, 200mw, 25mw Power Output - V1.3 (latest version)
Racedayquads.com
|
$34.99 |
Antenna |
Pagoda-2 Omni Antenna RHCP
(15 builds)
Farvew.com
|
$10.49 |
Receiver |
Turnigy iA6C PPM/SBUS Telemetry Receiver 8CH 2.4G AFHDS 2A
– MultiRotorMania
(4 builds)
Multirotormania.com
|
$14.00 |
HD Camera |
GoPro Session 3D Printed Camera Mounts
(42 builds)
Phaserfpv.com.au
|
$22.95 |
How's this build holding up for you? Do you like running the higher kv motors on bi-blade? Most importantly how do your lipo's hold up?
The build is solid. I was running the biblades for efficiency reasons at high kv and getting 2 minutes on 1300mah, 2:30ish on 1550 mah, but have since switched over to T-Motor F40iii 2750kv running Dal Cyclone 5046 triblades and get more grip in turns so I can hold my line a little better. As far as lipos... I'm using Pulse 1550 HV batteries and getting about 2:30 out of them.. Coming down around 3.75v per cell.