Falcon Multirotor Garage Crab 3"
By chenosaurus on May 12, 2017
This thing is quick! FC stack is only 1 board secured with VHB. 265g AUW w/ a 1000mah 4s!
Photos
Part List
Frame |
Garagecrab
(14 builds)
Falconmultirotors.com
|
$50.00 |
Flight Controller |
OMNIBUS Betaflight 3.1 F3 6DOF Mini Flight Controller 20x20mm Integrated OSD Built-in 5V BEC
(11 builds)
Banggood.com
|
$21.99 |
ESCs |
4 x EMAX D-SHOT Bullet Series 20A ESC(BLHELI_S)
(19 builds)
Getfpv.com
|
$47.96 |
Motors |
4 x Brotherhobby Tornado T1 1407 3600KV
(329 builds)
Getfpv.com
|
$63.96 |
Propellers |
1 Pair DYS 3045 3 Inch 3 Blade Propeller Triblade Bullnose Prop Red Orange Yellow Green Blue Purple
(32 builds)
Banggood.com
|
$1.39 |
FPV Camera |
Furious 1/4 CMOS 700VTL FPV 150 Degree Wide Angle Lens CameraSKU: FPV-700VTL
(3 builds)
Furiousfpv.com
|
$16.95 |
FPV Transmitter |
Eachine VTX03 Super Mini 5.8G 72CH 0/25mW/50mw/200mW Switchable FPV Transmitter
(417 builds)
Banggood.com
|
$12.22 |
Receiver |
Frsky XM+ Micro D16 SBUS Full Range Mini Receiver Up to 16CH for RC FPV Racing Drone
Banggood.com
|
$13.69 |
Batteries |
Venom 50C 4S 1800mAh 14.8V Drone Racing LiPo with Universal 2.0 Plug
(5 builds)
Venompower.com
|
$34.99 |
Nice build man, like that you slammed the stack. Quite literally just finished posting my crab build and mentioning how i would have liked to been able to do exactly what you did. Curious, whats holding the camera in place? Got more photos of the innards?