Here is a mini quad turbine in TPU with 1103 brushless motors that accepts the 3S with the propellers 4 blades and 2S with the 5 blades.
The chassis and the lipo door are in TPU Ultimaker and the top plate in Polycarbonate or ABS to rigidify the whole.
It takes 20% filling for the frame with 230 ° on a carpet at 70 ° at a speed of 30mm / s.
Frame |
Woop 105mm Indestructible TPU Brushless 1105 7500kv 3S by Microdure
Thingiverse.com
|
See Site |
Flight Controller |
Lumenier Micro LUX F4
(2 builds)
Drone-fpv-racer.com
|
$46.00 |
Batteries |
Turnigy nano-tech 450mAh 3S 65C Lipo (E-flite Compatible lame 180CFX EFLB4503SJ30)
Hobbyking.com
|
See Site |
Batteries |
Turnigy nano-tech 450mAh 3S 65C Lipo (E-flite Compatible lame 180CFX EFLB4503SJ30)
Hobbyking.com
|
See Site |
Misc Parts |
Protection Camera FPV TPU Eachine TX01 / TX02 / TX03 by Microdure
Thingiverse.com
|
See Site |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
New Message for Microdure