Indestructible Tiny Whoop TPU 90mm 2S

By Microdure on May 15, 2017

4  208  0

Here is an indestructible version of the Tiny Whoop 90mm 2S TPU Ultimaker .
The chassis and the protection camera are in TPU
The top-plate and the lipo fixing are printed abs or polycarbonate to rigidify the whole of the chassis.
The TPU parts can also be made of ninja semi-flex

Camera protection:
It is very easy to adjust the tilt of the camera and it can fall back in case of shock.
The TPU camera envelope + the headband made directly from the 3D coil wire
There are versions in wire of 2.75 mm and in wire of 1.75mm
There are several versions for the TX01 and 02 and for the TX03 which is larger

Photos

Discussion

Sign in to comment

Guides & Reviews

29 2,571  33
30 days ago

This guide will walk you through the process of building your first FPV quad. The goal with this design was to build a low-cost, lightweight quad, yet powerful enough to safely carry a GoPro in close proximity areas. I chose these parts to minimize the amount of soldering at no cost to the quality. A typical build requires around 30 solders while this only needs 25. It's not a huge difference, but..

Read more
26 6,987  24
Nov 30, 2019

In late 2019 DJI made inroads into the FPV scene with their remarkable low-latency digital system. It gave us a 720p video feed with latency on-par with the status quo, analog video. Traditionally we've used analog video systems for low-latency video, but the video quality is far from ideal. It's a trade-off we've been willing to accept for the control. Now we've got the best of both worlds and what..

Read more